:	Jan 23, 2007

.

Remove the floor console upper panel.

.

Remove the cigar lighter assembly closing panel.   Release the 4 clips.

.

Release the floor console wiring harness and disconnect the 5 electrical connectors.

.

Remove the floor console.   Move the front seats fully forwards.   Remove both rear Torx bolt covers.   Remove the 4 Torx bolts.

.

:   Do not disassemble further if the component is removed for access only. Remove the floor console lid.   Open the lid.   Remove the 2 Torx bolts.   Remove the 2 covers.

.

Remove the floor console stowage compartment.   Remove the 2 Torx screws.   Release the 5 clips.

.

Remove the auxiliary socket panel.   Release the 2 clips.   Disconnect the 2 electrical connectors.

.

Remove the floor console register trim panel.   Release the 6 clips.   Remove the screw.

.

Remove the cup holder.   Release the 2 clips.

.

Remove the wiring harness.   Release the 3 clips.

.

Install the wiring harness.   Secure the clips.

.

Install the cup holder.   Secure with the clips.

.

Install the floor console register trim panel.   Secure with the clips.   Install the screw.

.

Install the auxiliary socket panel.   Connect the electrical connectors.   Secure with the clips.

.

Install the floor console stowage compartment.   Secure the clips.   Tighten the Torx screws.

.

Install the floor console lid.   Install the covers.   Tighten the Torx bolts to 3 Nm (2 lb.ft).

.

Install the floor console.   Tighten the Torx bolts to 10 Nm (7 lb.ft).   Install the Torx bolt covers.   Connect and secure the electrical connectors.

.

Install the cigar lighter assembly closing panel.   Secure with the clips.

.

Install the floor console upper panel.